First thing you need to know when connecting a brand new wireless device
to the network is the wireless network password. 

This article will walk you through the process of getting the wireless
network password. 

 

This applies to the following model:
EPG600, EPG5000, ESR600, ESR350 and ESR300.

 

Step 1

We need to login to the setup page of the router. Using a computer that is
connected to the router (wired or wireless), open a web browser. It can be
Google Chrome, Mozilla Firefox, Safari, Edge or Internet Explorer. It can
be any browser. 

Find the Address bar. It should look like the one below:

PortForward2.jpg

This time, you will be asked for the username and password. Enter the
username and password setup for the router. The default username is
admin and the default password is
adminLogin_Page_Router.png

On the Home Page, click on the Cogwheel button (Network Settings)

NEtwork_Settings.jpg

 

Step 2

Under Device Management, navigate to
Wireless 2.4 GHz>Security. 

Wireless_Network_Key.jpg

If using the WEP, check the Default Key. If the Default
Key is Key 1, the value on Encryption Key 1 is the Wireless Network
Password. 

WEP.jpg

If WPA is being used, the value on Pre-Shared Key is the
wireless network password. 

WPA.jpg

If the router is Dual Band, you need to navigate to Wireless
5GHz>Security to know the wireless network
password for the 5 GHz band. 

 

You can now connect your new device to the network using the wireless
network password.