FAQ – Wired Networking

FAQ >> Wired Networking

Frequently Asked Questions

• How can I set up vlan with VID2 as untagged not VID1 on EnGenius Switches? - 3 years ago
• Subnet Mask and CIDR: How many valid hosts can be used on a specific subnet (Classless Addressing)? - 3 years ago
• IPv4 Standard Reserved Addresses - 3 years ago
• How to open Port on an EnGenius Router - 3 years ago
• What trunking Protocol is supported on EnGenius Switches? - 3 years ago
• Is there a length limit to PoE cable runs? - 3 years ago
• Why Subnetting is Important - 3 years ago
• How to Fix: Error 800 Windows 7 (L2TP over IP Sec Client Unable to Connect) - 3 years ago

1

Layer 2 PoE Switches

• Which SFP modules are compatible with EnGenius switches? - 3 years ago
• Uploading Firmware on an EnGenius Switch - 3 years ago
• What is the Power Budget of my EnGenius Switch? - 3 years ago
• What are the settings to be used on the Serial Connection Software (e.g Putty/Hyper Terminal) for Switches? - 3 years ago
• What type of cable should be used to connect a computer to an EGS/EWS switch’s serial port? - 3 years ago
• Should I use fiber or copper for my network ? - 3 years ago
• What Serial Software can we use for EGS/EWS Switches? - 3 years ago

1

Managed PoE Switches

• Is there an option to back up the configuration file on the EGS2108P? - 3 years ago
• Does EnGenius switch supports Discovery Protocol to allow IP phones to automatically connect to the voice VLAN (LLDP-MED)? - 3 years ago
• My EGS2108P locks up when DHCP lease time is up on the connected DHCP server. - 3 years ago
• I cannot set Captive Portal on 2.4GHz/5GHs SSID profile using Neutron Controller on EWS5912FP. - 3 years ago
• How can we identify if the EGS2110P is a V1 or a V2. What is the difference between V1 and V2? Are there any features on the V2 that is not on the V1? - 3 years ago
• Does the EGS7228P support the Cisco Discovery Protocol (CDP)? - 3 years ago
• How many VLAN profiles can be specified on the EGS7228P? - 3 years ago
• How can I access EGS5212FP through the console port? - 3 years ago
• White Paper: Using VLANs with EnGenius APs and Switches - 3 years ago
• Is there a way to set up multiple VLAN profiles at once on the EGS7228P? - 3 years ago

1 2 3

Managed Switches

• Best Practices for EnGenius Managed Network Switches - 3 years ago
• White Papers: Routers and Network Controllers (3rd party) - 3 years ago
• Naming Convention: Non-PoE Switches - 3 years ago

1

Management and Monitoring Software

• How to Fix: Neutron APs status show as “offline” on the Controller. - 3 years ago
• What ports should be opened for ezMaster to work? - 3 years ago
• What are the options available on the Neutron Captive Portal? - 3 years ago
• ezMaster – Captive Portal Configuration Guide - 3 years ago
• Installing and setting up VMware Player for eZMaster - 3 years ago
• Installing and setting up ezMaster on Virtual Machine - 3 years ago
• How to change and add user login on EnGenius EWS Switch? - 3 years ago
• I can ping my (3) EAP350v2 access points but the EnGenius Zone Controller cannot find them. - 3 years ago
• What should I do if port 1234 is Closed after doing connectivity test on EZ Master? - 3 years ago

1