The SkyKey I can be deploy to manage up to 100 EnGenius Wireless Access Points and switches from both remote and local sites intuitionally and easily. The solution is also supported to power by either 802.3af/at PoE (Power Over Ethernet) or DC12V power .
| File Name | Type |
|---|---|
 SkyKey I Datasheet
|
Data Sheet |
|
Skykey1 Quick Guide
|
Quick Guide |
|
Skykey I firmware v1.0.51 (upgrade both software and hardware)
|
Firmware |
|
Skykey I firmware v1.0.5.57S
|
Firmware |
|
Skykey I update file v1.0.63
|
Firmware |
|
Skykey I update file v1.0.65
|
Firmware |
|
SkykeyI update v1.6.6
|
Firmware |
|
SkykeyI update v1.0.67s
|
Software |
Model: Qualcomm IPQ4019
Architecture: 32-bit
Clock Rate: ARM A7 Quad Core 717MHz
Hardware Encryption Acceleration: Yes
System Memory: 1GB DDR3
eMMC: 4GB (MLC)
2 x 10/100/1000 Mbps RJ45 ports (1 x PoE)
1 x Micro SD Slot
1 x DC-Input Jack
1 x Reset Button
1 x Power LED (Orange)
2 x LAN LED (Green)
Up to 100 devices (Access points or switches)
Maximum 7 days if users control and manage 100pcs of Access Points and switches on a SkyKey solution
Users can realize status of Access Points and Switches
CPU: Usage (%) of CPU for this SkyKey
Memory: Usage (%) of Memory for this SkyKey
Disk: Usage (%) of Disk for this SkyKey
Users can realize ezMaster software version on this SkyKey
Updated or revised projects are listed in the right side bar.
Enable the function to detect the fake access points in the environment.
The page will show clients’ information including client name, getting IP, MAC address, Client OS*, SSID, Band, Tx, Rx, and RSSI information.
Top 10 traffic for the Managed AP. We can reserve data up to 30 days.
Top Fifty (50) traffic for wireless client devices.
Topology view provide a glance how all the devices is being connected with all the connecting parameters presented. In this view, network administrator can quickly identify connection faults and perform necessary troubleshooting.
Enter this view to find locations of Access Points or switches on global view of google map. You may also filter one of APs from google map easily.
Upload a floor plan for this project. Users can put a known floor plan and then place Access Points or switches on this view.
Provide a topology of the MESH Links.
Captive Portal profile setting will be set a profile to apply on one of SSIDs. Users can configure authentication types, session of connecting clients, redirect page types and redirect behaviour
Users can realize ezMaster software version on this SkyKey
Update or revise projects are listed in the right side bar.
Throughout this function to proceed mass upgrade procedure on a specific AP.
Throughout this function to proceed mass upgrade procedure on a specific switch.
Synchronise clients’ information of AP to a remote log server.
Option 1: Backup configure files to SkyKey
Option 2: Backup config files to Micro SD card
Note: Save up to 5 configuration file
Temperature: 0°C~40°C (32°F~104°F)
Humidity: 0%～90% typical
Temperature: -40°C~80°C (-40°F~176°F)
Humidity: 0%～90% typical
TBD
TBD
